Quick Start Guide

Quick Start Guide Quick Start Guide
1. The mounting surface must withstand five times the weight of
your camera.
2. Do not let the cables get caught in improper places or the electric
line cover can be damaged. This may cause a short or fire.
3. Use the mounting template to mark and drill the necessary holes in
the mounting surface.
4. The camera has a manual IR switch, located under the camera’s
lens. You can use this switch to manually turn the IR LEDs on or o
to match your installation needs.
STEP 1 – PREPARING TO MOUNT THE CAMERA
Pass the wires through the mount bracket and make all
necessary connections. Connect the BNC cable and power
cables to the camera.
STEP 2 – CABLING THE CAMERA TO
EXTERNAL DEVICES
Power
Requirements
Power Consumption
DC12V
DC12V (LED o): 1.98W, 165mA
DC12V (LED on): 2.62W, 218mA
Tel: [phone]
Technical Support Hours:
9:00AM – 8:00PM EST, Monday thru Friday
digital-watchdog.com
DWC-MC553WTIR
WHAT’S IN THE BOX
Color deco
rings
1 Set
Template
sheet
1 Set
Test video
cable
1 Set
Quick Setup
Guide
1 Set
Screw and
plastic
anchor-4pcs
1 Set
Torque
wrench
1 Set
External
OSD and
signal
controller
1 Set
Screw &
Plasc Anchor-4pcs
External OSD &
Signal Controller
Manual Torx WrenchTemplate Sheet
Test Video Cable
Color Deco Rings
Screw &
Plasc Anchor-4pcs
External OSD &
Signal Controller
Manual Torx WrenchTemplate Sheet
Test Video Cable
Color Deco Rings
Screw &
Plasc Anchor-4pcs
External OSD &
Signal Controller
Manual Torx WrenchTemplate Sheet
Test Video Cable
Color Deco Rings
Screw &
Plasc Anchor-4pcs
External OSD &
Signal Controller
Manual Torx WrenchTemplate Sheet
Test Video Cable
Color Deco Rings
Screw &
Plasc Anchor-4pcs
External OSD &
Signal Controller
Manual Torx WrenchTemplate Sheet
Test Video Cable
Color Deco Rings
Screw &
Plasc Anchor-4pcs
External OSD &
Signal Controller
Manual Torx WrenchTemplate Sheet
Test Video Cable
Color Deco Rings
Screw &
Plasc Anchor-4pcs
External OSD &
Signal Controller
Manual Torx WrenchTemplate Sheet
Test Video Cable
Color Deco Rings
EXTERNAL CONTROLLER
IR Switch
ON/OFF
Attention: This document is intended to serve as a quick reference for
initial set-up. It is recommended that the user read the entire instruction
manual for complete and proper installation and usage.
NOTE: Download all your support materials and tools in one place
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in
the ‘Search by Product’ search bar. Results for
applicable part numbers will populate automatically
based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.