User Manual

53
Record Configuration
Setup - Record Setup
1
2
3
4
5
6
7
8
1
Enabled - Enable or disable this function.
2
Storage Device - This option shows the SD card currently mounted on the camera.
3
File Type - Select the recording file type.
Currently, the camera supports MP4 file type.
4
Storage - Select the storage type. SD Card (Disabled) selection is not allowed.
5
Continuous - If continuous mode is enabled, the camera will start recording automatically.
6
Pre Duration - Define the duration of recording before an event.
7
Post Duration - Define the duration of image transfer after an event.
8
Click ‘Save’ to save the current settings.
Click 'Cancel' to return to the previous setting.