User Manual

Installation -

Installation

Using the template sheet, make the cabling hole

on the wall/ceiling. After making the cabling hole,

pass the cables through the hole.

Connect the network cable and power cable

respectively. See the section 'Installation - Cabling'

for details.

Put the Lan cable into (a), then (b) will be

assembled to (a) tightly. As a final step, (c) need

to be assembled to (b) without making any space.

Fix the camera on the wall/ceiling by screw

provided.

Loosen the Pan/Tilt/Rotate screw a little before

fixing the camera.

After adjusting the view angle, tighten the Pan/

Tilt/Rotate screw.

Remove the protective film from the camera to

complete the installation.

Template Sheet