Specifications

GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG
15
PTZ
To setup a PTZ camera, select the PTZ tab.
£ Select the Protocol for the PTZ camera you are using.
¤ Setup Camera ID and Baud Rate. Check your camera manual for the information.
¥ Set a Tour, so camera can automatically move between different presets. Configure up to two Tours, and each tour can have up to 8
presets
¦ If a tour has been set, set the Duration for the staying time when the tour is activated.
POS
To setup a Point-of-Sale (POS) device, connect the POS device to the Terminal Block connection for RS232C.
Go to [Setup] > [System] > [Sensor/POS Port], and select POS (1-8).
Go to [Setup] > [Camera] > [POS], and select the protocol, baud rate, and character code for your POS device.
୔The VMAXD1 only indicates ASCII Characters.