Specifications

GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG
55
Miscellaneous Control
Turn ON or OFF the external devices.
Go to [Menu] > [ Information] > [Misc Control].
Audio
Select the Audio tab; then, select the channel(s) to be activated or Mute.
VMAXD1 16 supports 16 channels of audio, and VMAXD1 8 supports 8
channels of audio.
Relay
Select the Relay tab; then, select those you wish to activate.
VMAXD1 16 supports 4 channel inputs, and VMAXD1 8 supports 2
channel inputs.
Text
Select the Text tab; then, select the channels you wish to add text.
VMAXD1 16 supports text input for channels 1 through 16, and VMAXD1
8 supports 4 channels of text input.
Spot
Spot is to output a channel that is set for a certain function, and Spot has an independent monitor and output. Spot is prioritized in the
following order: Manual Spot, Event Spot, Sequence Spot.
VMAXD1 16 supports 4 Spot Channels, and VMAXD1 8 supports 1 Spot
Channel.
ཛ Manual Spot
Go to [Menu] > [Information] > [Misc. Control] > [Spot], and configure the SPOT as Single, Quad, 4xQuad, or Sequence Mode.
ཛྷ Event Spot
This feature quickly displays a channel that is set with event function to display when an event (Sensor, Motion, and Audio) occurs.
The event check interval is one second. If events are detected in many channels, the channel with the last event will display.
To configure, go to [Setup] > [Recording] > [Alarm] > [Spot].
ཝ Sequence Spot
The user can select more than one channel for Manual Spot and have a sequential image display through Spot.
To configure, go to [Menu] > [Information] > [Misc. Control] > [Spot].
Select the Sequence option.