Instruction manual

25
MOTION
The camera can detect the movement and display an alarm on the screen
when movement is detected.
AREA SET
AREA 1 ~ 4 OFF / ON
If ON, motion areas can be selected and moved accordingly.
Select Areas 1-4 and adjust using controls for TOP, BOTTOM,
LEFT, or RIGHT.
SENSITIV.
1 ~ 30 Sensitivity level of the motion detection is adjustable. Motion
Detection will be more sensitive at a higher number.
SHOW INDI.
OFF / ICON Set the Show Indicator to OFF, ICON, or TRACE. If ICON is selected, a
TRACE a bell will appear in the upper right hand corner when motion is
detected. If TRACE is selected, the area where motion was detected
will be highlighted.
EXTER OUT (ALARM SIGNAL, EXTERNAL OUTPUT)
OFF / ON If ON is selected, you can set how long the alarm is displayed on
the screen when motion is detected (0 ~ 15 seconds).
EXIT JUMP
SAVE & EXIT Save the current settings and exit the OSD menu.
EXIT Exit the OSD menu without saving the changes.