Instruction manual

WEBVIEWER*
S e t up > S y s t e m > U p g r a d e
U p g r a d e t h e M E G A p i x c a m e r a a n d r e s e t i t t o f a c t o r y d e f a u l t .
Camera Information- Shows the camera’s model name, current firmware, Kernel, and Server
versions, and the camera’s internal Flash size memory. This is the camera’s internal memory
necessary, for the camera’s operation, and cannot be used for recording locally.
Manual Upgrade- To upgrade system firmware, you have to contact manufacturer and get the
upgrade file first. Go to www.Digital-Watchdog.com and select Support tab.
a. Browse file and select the file and press ‘Upgrade’. The system will automatically reboot.
FTP Upgrade-
a. Server Address- FTP Server IP address.
b. Port- Default is 21.
c. User ID and Password- FTP Server Log in ID and Password.
d. Directory- Upgrade File Path.
e. Action- Select Check Upgrade to display the Upgrade File list.
f. Status- Display upgrade progress.
Factory Reset- Reset the camera to its
original factory settings.
a. ‘General’- reset to factory default
on all settings except Network
settings.
Full’- will reset ALL of the
camera’s settings.
46
[Manual Upgrade]
[FTP Upgrade]
[Factory Default]