Technical data

Technical Data
184 VIPA GmbH CP486 ⋅ 00/14
7. Technical Data
7.1 Base Module
Power supply +5V +/-5%
Power assumption (without options) 1.4 A (CP486S)
1.6 A (CP486M, CP486ML, CP486L, CP486XL)
Loading voltage for options 24V DC +/-10%
Processor CPU80486SLC
Clock frequency 25MHz/33MHz
Main memory 1 MB / 4 MB with parity
Video-interface VGA, 16Bit, 256KB, max. 800*600 pixel resolution
connection to TTL-, EGA-, VGA-, BAS-, RGB-
monitor (cable length for BAS and RGB: 250m)
connection for EL display (EGA, mono, 640*350 pixel)
Option: EL-display VGA 640*480 pixel, 16 grey levels
(only CP486M, CP486L and CP486XL)
Option: TFT-display VGA 640*480 pixel, 16 or 64 colors
(only CP486M, CP486L and CP486XL)
Keyboard Standard-AT (symmetrically up to 250 m)
Serial interfaces COM 1/3: V.24
COM2: TTY
COM4: RS422/485
Diagnostic interface Send and receive data with TTL level
Parallel interfaces LPT1 (Centronics)
LPT2 (Centronics via pin header)
Floppy disk drive 3.5" (720KB / 1.44MB)
Hard disk interface IDE standard
Chip silicon disk Slot for 2 DIP-ICs, 32-pin
Memory card silicon disk Panasonic interface
CP-interface 8 banks each of 1K*8
Watchdog triggerable, LED display, reset key
Write protection Serial number and write protection logic
AT-bus ISA-96-Bus, 16Bit, short card
+/-12V/200mA, -5V/50mA
System-Bios QUADTEL acc. to VIPA specification
VGA-Bios C&T acc. to VIPA specification