Technical data

Hardware
CP 486 ⋅ 00/14 VIPA GmbH 33
2.8. Interface Installation for VGA Flat Displays
A module (optional) can be plugged into the pin header X22 having a 15-pin SUBD socket at the
module front. VGA flat display with 16 grey levels (EL display, 640*480 pixel) or a color TFT
display (640*480 pixel, max. 64 colors) can be connected to this 15-pin SUBD socket.
2.9 Setting of AT Additional Boards
The extension bus corresponds to the IBM PC/AT extension bus with following restrictions:
- +12V,-12V and -5V can be loaded together with approx. 1 Watt
- EGA/VGA controller, FDD controller, HDD/TFI controller, COM1-4 and
- LPT1 are already integrated in the motherboard and can no more be plugged in.
- For reasons of space only a short 8/16Bit AT card can be plugged in. The
cards are allowed to have a max. dimension of 108mm (incl. gold reed) * 158mm.
Before installing, remove the metal angle at the front of the AT card. After the card has been
inserted, mount again the angle from outside.
Attention: please set up the card configuration (i.e. address assignment, interrupt assignment and
DMA-assignment) before installing it, in such a way to avoid collision with the CP486. Dual
assignments can damage and destroy the CP486 as well as the additional card.