Technical data

Assignment of Plugs and Sockets
44 VIPA GmbH CP486 ⋅ 00/14
3.7 2-pin Plugin Socket for External 24V Supply
CP486 delivery includes a 1m long connecting cable with plug. M24 (mass of 24V) and P24 (+24V)
is are supplied via the two pins. Both pins are optionally assigned. Polarity is of no importance.
Attention:
Concerning the 24V supply via this socket it must be ensured that the 24V supply of back plane bus
is deactivated via the jumper field X3 (cf. section 2.3)!
3.8 15-pin SubD-Socket with VIPA Diagnostic Interface
15 TxD COM1
10 RxD COM1
5 GND
14 TxD COM2
9 RxD COM2
4 +5V
13 TxD COM3
8 RxD COM3
3-
12 TxD COM4
7 RxD COM4
2-
11 +24V
6 M24
1 screen
VIPA diagnostic interface disposes of send and receive data lines (RxD and TxD) of the four
present COM interfaces for listening as TTL-signals. Evaluation can be carried out by means of
UPI-FOX of VIPA.
Supply voltages 5V and 24V are made available for external consumers.
5V supply is protected by the micro fuse F2 (2A).
24V supply is protected by the micro fuse F1 (2A).