User guide



GOLANTECH T: + 9 7 2 -3 -6969690 |F: [phone]
in the suit case where the WiFi software is showing the test
results in a graphic way and so is the Bluetooth software ,
the software combine all the inputs from the surrounding
area and decode the information automatically .
Locating Electronic objects inside objects using:
A non-linear junction detector GSS-24 is used while
conducting strategic and search work a field, in rooms,
transport, and is designed to find special equipment
containing semiconductor components. An automatic
system of frequency selection is integrated into the device,
and it can tune away from narrowband interference
automatically (by a criterion of minimum noise of the
receiving channel of the 2nd harmonic).
Technical Characteristics:
 Type of a probing signal -- pulse, CW
 Power of pulse signal (duty ratio 50) /CW signal --
10/1 W
 Sensitivity (at signal-to-noise ratio of 10) -- not worse
-108 dBm
 Signal frequency -- within range 2400-2483 MHz
 Dynamic range -- more than 80 dB
 Operation time from a built-in battery -- at maximum power of probing signal
(pulse/CW) not less 3.0 / 1.0 h
Locating hot objects inside objects and walls using:
Thermal camera Scan for heat bodies hidden in walls and home appliances. Resolution
80*60 pixel , Thermal Sensitivity 0.08℃/30℃,Visual Angle/Minimum imaging distance
10 degree*7.5degree/0.1m , Spatial resolution 2.2mrad ,Focus ways Manual focusing,
Type of sensor Un-cooled focal plane ,Operating band 8-14um, Screen size2.5"" TFT
screen ,Image storage Standard 2GB SD card, support up to 16GB,File format*.UIR Video
output PAL(50Hz) or NTSC(60Hz) composite video(with optional base)
Battery,charger,2G memory card.
Physical examination (search) by: scan pole camera, and most
importantly through the human factor that can think and
analyze the place and with an experience of over 14 years in
the field to get the closest result to 100 percent.