User`s manual

28
Functions
1. Set Preset
Method 1) Use keyboard controller:
Refer to your system keyboard manual.
Method 2) Use OSD menu.
2. Run Preset
Method 1) Use keyboard controller:
Preset key + Number key (1~128)
3. Delete Preset
To delete preset, use OSD menu.
Preset
Maximum 127 positions can be stored as preset
positions. The preset number can be assigned from
1 to 128, but 95 is reserved for starting OSD menu.
See section “ROOT MENU > FUNCTION SETUP >
PRESET SETUP.”
1
Scan
The scan function allows camera to move repeatedly
between 2 preset positions.
See section “ROOT MENU > FUNCTION SETUP >
SCAN SETUP.”
2
1. Set Scan
To set scan, use OSD menu.
2. Run Scan
Method 1)
Scan key + Scan no. (1~8) + Enter key
Ex. Run scan 2 = Scan key + [2] + Enter key
Method 2) Preset key + [Scan no. (1~8) + 140]
Ex. Run scan 2 = Preset key + [142]
3. Delete Scan
To delete scan, use OSD menu.
Pattern
Pattern function is where the camera memorizes a
path created by a joystick controller and revives
the path exactly as it memorized for an assigned
time.
See section “ROOT MENU > FUNCTION SETUP >
PATTERN SETUP.”
3
1. Set Pattern
To set pattern, use OSD menu.
2. Run Pattern
Method 1)
Pattern key + Patter no. (1~4) + Enter key
Ex. Run pattern 2 = Pattern key + [2] + Enter key
Method 2) Preset key + [Pattern no. (1~4) + 130]
Ex. Run pattern 2 = Preset key + [132]
3. Delete Pattern
To delete pattern, use OSD menu.
Group
The group function allows you to run sequence of
presets,
pattern, and/or scans.
See section “ROOT MENU > FUNCTION SETUP >
GROUP SETUP.”
4
Schedule
The schedule function allows you to run an appropriate
function like preset, scan, group, pattern, home, or
move at a designated day and time.
See section “ROOT MENU > FUNCTION SETUP >
SCHEDULE
SETUP.”
5
When the pattern is saved/executed, the pan/tilt is
operated with “AUTO FLIP-OFF.”
1. Set Group
To set group, use OSD menu.
2. Run Group
Method 1) Group key + Group no. (1~8) + Enter key
Ex. Run group 2 = Group key + [2] + Enter key
Method 2) Preset key + [Group no. (1~8) + 150]
Ex. Run group 2 = Preset key + [152]
3. Delete Group
To delete group, use OSD menu.