Use & care guide

DUAL USB CHARGING FUNCTION

The REZAP

PRO is also equipped with two high powered USB ports

located at the back of the unit. By using standard USB cables that come with

many digital devices at time of their purchase, the charger can power a

range of otherwise unpowered devices or charge up different battery packs

in many 5-volt, self-powered devices.

DYNAMIC BATTERY TESTER FUNCTION

The REZAP

PRO has a built-in dynamic battery tester function, which

constantly monitors and measures the voltage conditions of all batteries

being charged. This information is always there in the system and readily

available on-demand, at a touch of a button will be displayed on the LCD

screen. Notes:

• Rechargeable and Alkaline batteries are rated at 1.2V and 1.5V

respectively. FULL charge condition for NiCd and NiMH batteries only

show a voltage reading between 1.34V to 1.44V whereas alkaline

batteries show 1.5V or more.

• Some exhausted and or faulty alkaline batteries often show a false

voltage of up to 1.5V or higher when measured by means of a volt meter

or the built-in tester function, however when these are put to use, they

quickly die out. These batteries are considered no longer useful and

should also be disposed of straight away to avoid eventual battery

leakage.

• During the charging of alkaline batteries, the charging voltage can rise up

to 1.8V or higher. This is quite normal and should not be alarmed. Once

the charging process is finished, the battery voltage will stablise and drop

down to a lower level.

ENGLISH ENGLISH