Use & care guide

• Different brands of alkaline cells may give different results, depending on

the chemical composition used in making the batteries. Do not be

surprised to find that some top brand alkaline cells may yield fewer cycle

lives than less well-known brands. Try different brands of batteries and

decide for yourself the brands that work best in your applications and in

the REZAP

PRO charger.

• The charger has four main slots with four corresponding green lights.

Only put one battery per slot. Do not try to put one battery on top of

another in a single slot.

• 9V alkaline batteries are not charged using “individual cell” technique due

to their internal structure (multiple cells linked together in series to give a

higher battery voltage). Any fault or weakness amongst the cells can

result in the battery being poorly recharged or not useable at times. Do

not hold high expectation on these batteries.

• 9V alkaline batteries when charged tend to expand slightly at their two

ends. This is normal considering their outer case constructions are not

made as strong as those of 9V rechargeable batteries.

• Cycle life is based on the battery receiving proper care and also depends

on the depth of discharge. In general, shallow discharges provide more

cycles than deep discharges.

CLEANING

Turn the power off and unplug the power supply before cleaning of the

charger.

• The Plastic Body can be cleaned with a damp cloth and then wiped dry

with a soft cloth. Do not use any abrasive or solvents on any plastic

surface.

• The battery compartment contacts can be cleaned using a piece of cloth

or used toothbrush dampened with Methylated Spirits solvent (available

from most hardware stores). Alternatively a clean pencil eraser can be

used to rub off any dirt and or deposit that might adhere to them.

ENGLISH ENGLISH