Use & care guide

19
REZAP® PRO RBC-889 SPECIFICATIONS
Microcontroller
Digital Works' state-of-the-art proprietary Multi-Chemistry battery charger’s
high performance 8-bit microprocessor, CMOS, fully static, employing
advanced RISC architecture with integrated analogue-to-digital converters
and multi-channel high speed input/output ports controlling the whole
charging process in real time.
Input Voltages
DC 12V, 2A Switching Power Adaptor (AC 100 - 240V 50/60Hz, 0.8A Max)
for SAA, GS & BS Standards or UL, CUL & JIS Standards
Output Rating
DC 12V, 2A max, 24 Watts max.
Supported
Battery Sizes
1 to 4 x AAA, AA, C, D & prismatic sizes (1.2 or 1.5V)
1 to 4 x 9V batteries
Supported
Battery types
Alkaline, Titanium, RAM (Rechargeable Alkaline Manganese), NiCd and or
NiMH batteries. (Do not attempt to charge battery type not specified.)
Supported
Capacities
AA size – Up to 3,000mAh
C & D size – Up to 8,000mAh
Charging Time
1 to 8 hours for Alkaline Batteries
1 to 16 hours for rechargeable batteries
Note: time variation depends on type, make, size and condition of battery.
Charging
Currents
Fully Automatic
Built-In Input
Output Ports
• 2 x Standard USB ports for charging of various digital devices that
accept USB power. Output current is regulated at 300mA per port.
• 1 x DC-OUT (variable digital outputs of 4.2V, 6V and 8.4V) for charging
and or acts as power source for various digital devices such as digital
cameras and digital video camcorders. Output current is regulated at
300mA per port.
•
1 x Mini custom USB interface port for future upgrades and expansions.
Battery Tester
Function
Built-in simulation of voltmeter, which measures the strength of each
battery and displays the voltage level via LCD.
Protection
Schemes
employed
• Alkaline battery charge-safe protection,
• Faulty battery detection & rejection,
• Overcharge protection,
• Short circuit protection,
• Wrong polarity protection,
• Negative Delta Voltage protection,
• Zero Delta Voltage protection,
• Temperature protection via built-in cooling FAN,
• Short and Open circuit protections on cooling FAN,
•
Timer protection.
Safety
Compliance
• AS/NZS 3108:1994; AS/NZS 3350.1:2000; AS/NZS 3350.2.29:2001
• EN 206041A; EN 60335.1; EN 60335.2.29 & CE (EN50082-1)
• EMC; C-Tick (AS/NZS 1044:1995) & FCC Part 15 Class B
• UL 1310 – Fourth Edition – Class 2 Power Units
• CSA Standard C22.2 No. CAN/CSA-223-M91
•
CSA Informs – Power Supplies No. 3
Net Weight
0.43 Kg.
Notes: All trademarks referenced in this data sheet belong to their respective owners.
Specifications subject to change without notice for further product improvements.
ENGLISH