Use & care guide

4
ESSENTIAL LCD INDICATORS
CAUTION - Care is required when
making DC-Out voltage selection as
over-voltage may lead to damage of
equipment being powered. ALWAYS
select voltage first and then plug in
device.
•
Select 4.2V – to power devices
accepting 3.0V – 4.5V input.
•
Select 6V – to power devices
accepting 5.0V – 6.5V input.
•
Select 8.4V – to power devices
accepting 7.0V – 9.0V input.
– Sound alert is only active when
channel select is pressed. Alert
sequences are as follows:
• 1 short beep – Channel select
returned to number 1 position. After
5 seconds delay with no further key
pressed, charge status of the
selected battery is alerted.
• No sound – selected channel has no
battery.
• 2 short beeps – selected battery is
being charged.
• 1 long beep – selected battery is
charged and ready for use.
• 2 long beeps – selected battery is
bad.
– Graphical illustration of battery
cell being charged.
– Battery is being analysed.
– Standard charging for
sensitive batteries.
– Fast charging when applicable.
– Battery is charged and ready for
use.
– Sensitive battery has been
rezapped and ready for use.
– Battery is bad and or no longer
rezappable. Prompt disposal is
required to avoid eventual
battery leakage.
– Fan is ON to cool down the
internal circuitry when required.
When FLASHING, fan is not
working and for safety reason,
charger only operates in
standard charge mode. When
all batteries are removed from
the charger, fan will be swiched
off automatically.
– Variable DC-Out port is ON.