User`s guide
Table Of Contents
- Table of Contents
- About This Guide
- Introduction
- Server Front/Rear Panel Controls and Indicators
- Server Utilities
- Introduction
- SCSI Select Utility
- Flash Utility
- Using EPP3SMC.EXE
- System Configuration Utility (SCU)
- Configuring Expansion Boards
- Locating the SCU
- When to Run the SCU
- SCU Keyboard Function Keys
- Starting and Using the SCU
- Configure Your Computer
- Setting the Date and Time
- Maintain the SCU Diskette
- SCU Options
- System
- Diskette Drive Group
- Hard Disk Group
- Serial Port Group
- Parallel Port Group
- Video Options Group
- Shadow Options Group
- Cache Options Group
- Miscellaneous
- SCSI Options Group
- PCI Slot Options Group: (PCI Slots 1-3)
- Expanding Your Server
- Introduction
- Tools Needed
- Static Electricity
- Disconnect External Devices and Power
- Removing the Side Panel
- Server Components
- Main Logic Board Components
- Upgrading the CPU Module
- Upgrade Sockets and Jumper Locations
- Installing Additional Secondary Cache Memory (i486 CPU Modules)
- Installing Additional Server Memory
- Installing a SIMM
- Replacing the Server Battery/Real Time Clock (RTC)
- Installing Video Memory
- Installing Expansion Boards
- Adding Mass Storage Devices
- SCSI Configuration Guidelines
- Expansion Brackets
- Installing a Device into the Front Access Drive Bay
- Installing a Device into the Internal Drive Bay
- Connecting Diskette and IDE Devices
- Connecting SCSI Devices
- External SCSI Bus Guidelines
- A-E
- F-S
- T-Z
- Problem Solving and Troubleshooting
- Server Security Features
- Appendix A: Technical Specifications
- Appendix B: Server Messages
- Appendix C: Device Mapping
- Appendix D: Caring For Your Server
- Index
Introduction
1-6
Restarting Your Server
Method How to Invoke Action Performed
Hard boot Turn the server off, then on, by
pressing the power On/Off but-
ton at the front of the server.
Runs memory tests and clears
all terminate stay resident pro-
grams (TSRs) and memory
registers.
Soft boot Press [Ctrl]+[Alt]+[Del]. Does not run memory tests but
clears all terminate stay resi-
dent programs (TSRs) and
memory registers (operating
system specific).
Reset Press the Reset button at the
front of the server.
Same as a hard boot.
Important Information
Under circumstances of poor posture or poor setup, certain recent scien-
tific articles suggest that injuries may occur. Other articles suggest that
there is no cause and effect. Because the safety of our users is a great
concern, it is important to take these precautions:
• Be comfortable in your work space.
• Change your posture frequently.
• Proceed according to the recommendations in the following table
and figure.