Technical data

Digital PRIORIS XL ServerDigital PRIORIS XL Server Service ProceduresService Procedures
MCS Logistics Engineering - NijmegenMCS Logistics Engineering - Nijmegen 6161
P
R
I
O
R
I
S
X
L
560/566 CPU Module Jumper Settings
Figure 3 - 24 shows the CPU module’s jumper location. The following table lists the factory default
settings. If necessary, refer to Chapter 5 “Device Mapping”, for memory mapping information.
560/566 CPU Module Jumper Settings
Feature
Description
Setting
CPU clock input (default
depends on the CPU installed
at the factory)
66 MHz
60 MHz
J5, pins 1 and 2 jumpered
J5, pins 2 and 3 jumpered
NOTE
Pentium (60 MHz or 66 MHz) CPU modules that do not have jumper J5 (CPU clock
input) have been factory set at the correct speed.
DEC00180-2
J5
123
Figure 3 - 24 560/566 CPU Module Jumper Locations