Technical data
Digital PRIORIS XL ServerDigital PRIORIS XL Server Service NotesService Notes
MCS Logistics Engineering - NijmegenMCS Logistics Engineering - Nijmegen 8787
P
R
I
O
R
I
S
X
L
Appendix A Service Notes
This appendix contains the current Service Notes for the PRIORIS XL product line.
Known Server limitations.
♦ Do not install a 5¼-inch diskette drive in the top drive bay. EMI shielding might cause elecrical
shorts to the etch on the diskette drive’s circuit board.
♦ Due to the length of the IDE cable, make sure IDE drives are installed in drive bay slots 1 and 2.
Otherwise, the IDE cable will not reach the IDE drive’s connector.
♦ PCI IDE expansion boards will not work in the server.
♦ The time required to boot the server might increase when a DE422 network card is installed in a
server that uses a Pentium CPU module.
Recommended Tools
The following tools will be needed for servicing Digital PC systems. Note that test equipment must be in
calibration.
♦ Multimeter (4 1/2 digit)
♦ A philips screwdriver
♦ An antistatic wrist strap
Other Needed Materials
Cleaning agent should be an all purpose cleaner that is used in-house.
Required Special Tools.
None.