Specifications

SF200 Manual
SF200E-0160-01 REV 04
Diane Smith
4/22/13
Page 11 of 28
4.2.5 Connect the SF-200 to the Mounting Pate using the
hardware that came with the Mounting Plate.
Be careful not to over tighten.
Qty = 4 Thread Forming Screws
Qty = 4 Washers
Note1 : The SF-200 Case is held together with four small screws.
DO NOT remove these small screws.
Note 2: The Thread Forming Screws that are used to mount the SF-200
to the Mounting Plate will screw into the same hole as the
small screws but will not go deep enough to touch the small
screws.
Note 3: The Thread Forming Screws will form their own threads into the
case as you screw them in.