Specifications

SF200 Manual
SF200E-0160-01 REV 04
Diane Smith
4/22/13
Page 18 of 28
5.3 If your SF200’s already has a Static IP Address assigned to it, it will
only connect to you Network if the Static IP Address is compatible
with your Network.
5.3.1 There is the possibility that the SF-200 you are trying to
connect to your Network was assigned a Static
IP Address that is out of your subnet range.
If this is the case you can change the it’s IP Address several
ways...
- The optional Remote Control can be used.
(See the Remote Control section of this manual)
- Have your network administrator set up a
temporary compatible network that will allow you to
connect to the SF-200 and long enough to change its
IP Address to another one that is compatible with the
main Network you are using.
Note: This method will only work if the SF-200 is
directly connected on the Network and not
through a Router.
- Noventri can help setup or reset the SF-200 through
it’s USB.
1-301-790-0103 www.noventri.com
5.4 The SF-200 NOVENTRI SERVER is now ready to be configured.
(See the Web App Configuration section of this manual)