Specifications

SF200 Manual
SF200E-0160-01 REV 04
Diane Smith
4/22/13
Page 24 of 28
6.6.15 REBOOT – To reboot the SF-200, click the REBOOT
button.
6.7 Once the SF-200 is NOVENTRI SERVER is Configured correctly
you will be able to access it through Noventri Server/Suite software
and Publish to it.
(See the Noventri Manuals - Design/Schedule/Manage)
http://www.noventri.com/forum/viewforum.php?f=36
7. Stand-Alone Usage (Sneakernet)
Note: If the Suite version used to create the project is newer than the
SF-200 firmware version, the Sneakernet Drive will automatically
update the SF-200 firmware, first, before the project begins to play.
If the Suite version used to create the project is older than the
SF-200 firmware version, the SF-200 may not play the Project.
Download the latest Noventri Suite software from the Noventri
Forum, install it, and use this Suite software version to create and
Publish your Project to the USB Drive.
http://www.noventri.com/forum
7.1 When using the SF-200 as a stand-alone (Sneakernet) player, the
Noventri Server is not needed.
7.2 Use the Noventri Suite to create a project with sequences
of images that you want to publish to the SF-200.
(See the Noventri Manual - Design)
http://www.noventri.com/forum/viewforum.php?f=36
7.3 Remove the USB Drive from the SF-200 and install it into the
USB port on your computer where the Noventri Suite software is
installed.
7.4 Publish the Project to the USB Drive, this will save the project you
created onto the USB Drive.
(See the Noventri Manual - Design)
http://www.noventri.com/forum/viewforum.php?f=36