Specifications

SF200 Manual
SF200E-0160-01 REV 04
Diane Smith
4/22/13
Page 25 of 28
7.5 Safely remove the USB Drive from the computer and plug it into
one of the USB ports of the SF-200.
7.6 The SF-200 will read the files on the USB Drive and automatically
start playing the project, displaying the sequence of images
on it’s monitor.
8. Remote Control (Needed to reset the SF-200 to it’s Default Network Settings)
8.1 The SF-200 Remote Control is available to be purchased
separately from Noventri.
1-301-790-0103 www.noventri.com
8.2 The optional Remote Control is especially useful if your SF-200 is
mounted out of reach. (such as hanging from a ceiling mount)
Note: The SF-200 does need to be visible so the infrared beam
from the Remote Control can be picked up by the SF-200
infrared receiver. (Remote Control cannot be used for
SF-200’s mounted out of sight, such as in a wall)
8.3 The Remote Control works with all SF-200’s that are in the area.
So care must be taken to know if more than one SF-200 in the area
is being accessed.
8.4 The Remote Control can be used for the following ....
8.4.1 Reboot – The Power button can be used to Reboot the
SF-200.
Infrared Receiver