Specifications

SF200 Manual
SF200E-0160-01 REV 04
Diane Smith
4/22/13
Page 26 of 28
8.4.2 Default - The SF-200 can be restored to it’s Default
Network settings.
This will do the following...
- Enables DHCP
- Resets the password back to “noventri”
To restore the SF-200 Default Network settings, do the
following...
- Using the Remote Control MENU button bring
up the Default Network Settings? menu.
(selecting the MENU button again will close the
menu)
- Using the Left/Right Arrow buttons select Yes
or No and then use the Enter button to select
your highlighted Yes/No selection.
The SF-200 will then Reboot for the changes to
take effect.
9. Specifications