Specifications

SF200 Manual
SF200E-0160-01 REV 04
Diane Smith
4/22/13
Page 9 of 28
4.2.2 First determine from what direction the Power Adapter cord and
Ethernet cable will coming from and also consider what direction
would be best for Remote Control access.
4.2.3 You can then position the SF-200 onto the Mounting Plate in any
one of four different directions allowing for Remote Access and
easy cable entry.
(see figure 1)
4.2.4 Verify that you are mounting the SF-200 on the correct side
of the Mounting Plate.
Bend in the plate is to allow room for the screw heads
between the Mounting Plate and the Monitor.
So this side of the Mounting Plate always goes toward
the Monitor.