Owner`s manual

2.4 Installing the Cabinet Models (TSZ07-BA/BB,
-EA/EB)
Installation of the Cabinet TSZ07 requires the following:
1. Unpacking the TSZ07.
2. Unpacking the accessories box.
3. Installing the cables.
When these procedures are complete you can operate the TSZ07 (see
Chapter 3 for operating information).
2.4.1 Unpacking The Cabinet Models (TSZ07-BA/BB, -EA/EB)
The TSZ07-BA/BB and TSZ07-EA/EB cabinet models are shipped in
one skid mounted carton (see Figure 2–7) and two smaller cartons.
The carton on the skid contains the TSZ07 tape transport cabinet and
the ramps for offloading the cabinet. The smaller cartons contain
documentation, a cleaning kit, a SCSI 2 cable, and a reel of magnetic
tape.
After unpacking the TSZ07, check the shipping documents to ensure that
the correct model has been shipped. If anything is missing, damaged, or
incorrect, contact the dealer from whom the equipment was ordered.
Installation 2–11