Owner`s manual

Figure 3–3: Inserting the Tape Reel
5. Close the front door.
6. Press the LOAD/REWIND switch. While loading, the Load/Rewind
indicator flashes and the message LOADING appears on the al-
phanumeric display. When loading finishes, the density message for
the tape appears. The Write-Enable indicator also lights if a write-
enable ring is installed.
7. Press the ONLINE switch. If the On-line indicator lights, the TSZ07
is on-line and ready for commands.
If the TSZ07 cannot autoload a tape, it may be necessary to load it
manually. Refer to Section 3.6.1.
3–10 Operation