Technical data

5.4.17 Plenum (P/N 29-28482-01)
To remove the plenum, refer to Figure 5–20 and proceed as follows:
1. Remove the left output air duct (refer to Section 5.4.14).
2. Remove the right output air duct (refer to Section 5.4.21).
3. Remove the input air duct (refer to Section 5.4.11).
4. Disconnect the motor connector .
5. Remove the four screws attaching the plenum to the top plate.
To replace the plenum, follow the removal procedure in reverse order.
5–32 Removal/Replacement Procedures