Technical data

5.4.35 Top Cover (P/N 29-28462-01)
To remove the top cover, refer to Figure 5–37 and proceed as follows:
1. Remove the four screws attaching the top cover to the hinges, then remove the top
cover.
To replace the top cover, proceed as follows:
1. Perform the removal procedure in reverse order.
2. If necessary, adjust the rear hinges so that the top cover opens and closes without binding.
3. If necessary, adjust the top cover latches to ensure that the top cover closes correctly. The
latches are located at the front of the top cover.
Figure 5–37: Removing the Top Cover
5–58 Removal/Replacement Procedures