Technical data

Figure 2–3: Tape Reel Insertion
5. Close the front door.
6. Press the LOAD/REWIND switch.
NOTE
You can load the tape with the front door open by pressing the LOAD
/REWIND and DENSITY SELECT switches simultaneously.
During loading, the Load/Rewind indicator flashes and the message LOADING appears
in the alphanumeric display. When loading finishes, the tape density message appears.
The Wrt En Test indicator also lights if a write-enable ring is installed.
7. Press the ONLINE switch. If the Online indicator lights, the drive is on line and ready
for commands.
Operation 2–9