Operation Manual
EE
36
DD
6.2.2 Wake-up alarm
The wake-up option of the DABMAN 100 supports to independently program-
mable wake-up timers. Both wake-up timers are set in accordance with the same
procedure. Proceed as follows:
Press the Menu key on the remote control.
Use the ◄► keys to navigate to the item "System".
Conrm by pressing the Enter key.
Use the ◄► keys to navigate to the item "Wake-up alarm".
Conrm by pressing the Enter key.
Use the ◄► keys to select the alarm you wish to set (options: Alarm 1 & Alarm 2),
conrm by pressing the Enter key. The display will show the logo of the wake-up
setting assistant. Conrm again by pressing the Enter key.
The rst step is to set the wake-up time, use the ◄► keys to select the hours,
then press the Enter key to enter the minutes, which you can also select using
the ◄► keys.
Conrm the time setting by pressing the Enter key.
In the next step, you can select the duration of the alarm, using the ◄► keys, the
options available here are 15, 30, 60 or 90 minutes. Select the desired alarm
duration, and conrm by pressing the Enter key. You can now proceed to select
the alarm source.
Use the ◄► keys to select the mode in which the alarm should go o. The options
are buzzer (neutral sound), DAB (digital radio) or FM (FM radio). Conrm by press-
ing the Enter key.
If you have selected the option FM or DAB, proceed in the next step to select
which station you wish to hear when you are woken. The options are "last se-
lected" (currently active station in the respective mode), resp. one of the favourite
stations saved under the respective operating modes (selection of favourites
6. OPERATION