Operation Manual
39
EE DD
6.2.5 Illumination
This option will set the background illumination of the display. The display can be
dimmed in 3 steps (high = full brightness, medium = medium brightness and low
= low brightness). Proceed as follows:
Press the Menu key on the remote control.
Use the ◄► keys to navigate to the item "System".
Conrm by pressing the Enter key.
Use the ◄► keys to navigate to the item „Illumination".
Conrm by pressing the Enter key.
Various options are available (timer switch o: display will switch from full to low
brightness after a preselected time interval, On setting: selecting display bright-
ness when commands are input. Dim setting: display illumination
In standby mode resp. when no commands are input). Selection and setting are
made using the ◄► keys, conrm your selection by pressing the Enter key.
Note: the display of the DABMAN 100 will consume the most energy if the illumi-
nation is set to full brightness.
Changes to the lighting settings can therefore aect the power consumption of
the radio. The consumption values set out in Chapter 10 were measured using
the standard settings.
6.2.6 Passive standby
This menu item allows you to activate the passive standby mode of the DAB-
MAN 100. Passive standby means that the radio will automatically switch to the
standby mode after a specied period of time (2, 3, 4, 5 or 6 hours) if during this
period no operating procedures are carried out (changing stations, adjusting
volume etc.). This function is deactivated in the default mode. To set this option,
proceed as follows:
6. OPERATION