Installation Instructions

17 DVB-T FTA Receiver
GB
• Video Output is used for switching the
video output mode. Two modes are
availabe: CVBS and CVBS+RGB. You can
press [Left/Right] key to choose.
• LCN Mode controls the channel sorted
by the sequence information in streams.
Press [Left/Right] keys to choose
between On and Off.
• RF System selects the RF system mode.
Press [Left/Right] keys to choose among
PAL-1,PAL-DK,NTSC and PAL-BG.
• RF Channel: PAL:21~69,NTSC:14~83.
3.3 Region and Time
• Region: You can press [Left/Right] key to
choose your.
• GMT Usage: You can press [Left/Right]
key to switch “Off/User Defi ne/by Region”.
• GMT Offset: This option is available
just when the GMT Usage mode is
User Defi ne.
You can press [Left/Right] keys to switch
“GMT Offset” value, and the range is “-
12:00
~
+12:00”, increase each half hour
progressively.
• Date: This option is available when the
GMT Usage mode is Off. You can press
[OK] key to start the setup. Then you can
set it by the number key.
• Summer Time: This item is only available
when the GMT Usage mode is by Region.
You can press [Left/Right] to choose.
• Time: The operation of this option is same
as Date.
• Time Display: The item can control
whether the time will be displayed on the
screen or not.
• Exit: Press [EXIT] key to draw back from
Time menu.
MAIN MENU
Anleitung DVB-T FTA_GB.indd 17Anleitung DVB-T FTA_GB.indd 17 03.09.2007 12:11:57 Uhr03.09.2007 12:11:57 Uhr