Specifications

19
DCS-3950 series Ethernet switch manual
Enter without input, the hostname will default to ‘switch’
3.3.2 Configuring Vlan1 Interface
Select ‘1’ in the Setup main menu and press Enter to start configuring the Vlan1
interface
Config Interface-Vlan1
[0]: Config interface-Vlan1 IP address
[1]: Config interface-Vlan1 status
[2]: Exit
Selection number:
Select ‘0’ in the Vlan1 interface configuration menu and press Enter, the following
screen appears
Please input interface-Vlan1 IP address (A.B.C.D):
When the user enters valid IP address for Vlan1 interface and presses Enter, the following
screen will appear:
Please input interface-Vlan1 mask [255.255.255.0]:
Select ‘1’ in the Vlan1 interface configuration menu and press Enter, the following
screen will appear:
Open interface-Vlan1 for remote configuration ? (y/n) [y]:
When the switch is booted for the first time, the Vlan1 interface is disabled by default.
In order to enable the vlan1 interface, ‘y’ or ENTER should be entered.
Select ‘2’ in the Vlan1 interface configuration menu will return to the Setup main
menu.
3.3.3 Telnet Server Configuration
Select ‘2’ in the Setup main menu and press Enter to start configuring the Telnet
server, the follow appears:
Configure telnet server
[0]: Add telnet user
[1]: Config telnet server status
[2]: Exit
Selection number:
Select ‘0’ in the Telnet server configuration menu and press Enter, the following
screen appears:
Please input the new telnet user name:
Note: the valid username length is 1 to 16 characters. When the user enters a valid
username and presses Enter, the following screen appears