Specifications

373
DCS-3950 series Ethernet switch manual
Switch(config)#interface ethernet 0/0/1
Switch(config-Ethernet0/0/1)#mls qos trust cos
24.4 QoS Troubleshooting
24.4.1 QoS Monitor and Debug Command List
24.4.1.1 show mls-qos
Command: show mls-qos
Function: Display global configuration information for QoS.
Parameters: N/A.
Default: N/A
Command mode: Admin Mode
Displayed information Explanation
Qos is enabled QoS is enabled.
24.4.1.2 show mls qos aggregate-policer
Command: show mls qos aggregate-policer [<aggregate-policer-name>]
Function: Display policy set configuration information for QoS.
Parameters: <aggregate-policer-name> is the policy set name.
Default: N/A.
Command mode: Admin Mode
Displayed information Explanation
aggregate-policer policer1 80000 80
exceed-action drop
Configuration for this policy set.
Not used by any policy map Time that the policy set is being referred to
24.4.1.3 show mls qos interface
Command: show mls qos interface [<interface-id>] [buffers | policers | queueing |
statistics]
Function: Display QoS configuration information on a port.
Parameters: <interface-id> is the port ID; buffers is the queue buffer setting on the port;
policers is the policy setting on the port; queuing is the queue setting for the port;
statistics is the number of packets allowed to pass for in-profile and out-of-profile traffic
according to the policy bound to the port.
Default: N/A.