Owner’s Manual
WARRANTY We at DigiTech® are very proud of our products and back-up each one we sell with the following warranty: 1. Please register online at digitech.com within ten days of purchase to validate this warranty. This warranty is valid only in the United States. 2. DigiTech warrants this product, when purchased new from an authorized U.S. DigiTech dealer and used solely within the U.S., to be free from defects in materials and workmanship under normal use and service.
INTRODUCTION Thanks for choosing the DigiTech® Mosaic 12-string effect pedal. The Mosaic creates a lush, shimmering chordal effect reminiscent of a 12-string guitar and can be used with both acoustic and electric instruments. And thanks to a true bypass design, your tone remains unaffected when the effect is bypassed. The LEVEL control blends in the amount of 12-string effect added to the dry signal. The TONE control provides high-frequency enhancement of the effect signal as it is increased.
USER INTERFACE 1 2 3 4 6 7 5 1. Power Connector Connect the provided power adapter to this jack. Do not use any power adapter other than the one supplied. 2. Level Knob Adjusts the level of the effect signal. 3. Tone Knob As this knob is raised, the tone becomes brighter and more enhanced. 4. Output Jack Connect this jack to the input of an amp, input of the next pedal on your pedalboard, or the effects return of an amp effects loop. 5. Input Jack Connect your instrument to this jack. 6.
MAKING CONNECTIONS/APPLYING POWER To connect the Mosaic pedal to your rig: 1. Turn down the amplifier’s master volume control. 2. Make all audio connections to the Mosaic as shown below. 3. Connect the included HARMAN power supply to the POWER input connector and connect the other end to an available AC outlet. 4. Strum your guitar and gradually increase your amplifier’s master volume control until the desired level is achieved.
EXAMPLE SETTINGS Try these settings to get started.
SPECIFICATIONS Electronic Sample Rate: Frequency Response: Signal to Noise Ratio: THD: A/D/A Conversion: Input Input Type: Max Input Level: Input Impedance: Input Impedance: Output Output Type: Max Output Level: Output Impedance: Output Impedance: Physical Dimensions: Weight: Power Power Consumption: Power Requirements: 44.1 kHz 20 Hz-11 kHz (Effect Enabled) > -105 dB (A weighted); ref = max level, 22 kHz bandwidth 0.
PHONE: (801) 566-8800 WEB: digitech.com SUPPORT: digitech.com/en-US/support Mosaic Owner’s Manual 5044262-C © 2017 HARMAN. All rights reserved. DigiTech is a registered trademark of HARMAN.