User Manual
Table Of Contents
- Introduction
- Features
- Included Items
- User Interface & Connectors
- Connection Diagrams
- Quick Start
- Operation
- Selecting a Loop in Memory
- Free-Form vs Auto Quantized Looping
- Recording a Loop (Free-Form)
- Recording a Loop Using Auto Record
- Recording a Loop (Auto Quantize)
- Recording a Loop Using Pedal Tempo (Auto Quantize)
- Recording a Loop Using the AUX IN Jack
- Multiple Loop Playback (Cueing Loops)
- Recording Overdubs
- Undo, Redo, & Clear
- Time Stretching a Phrase
- Storing a Loop
- Copying a Loop
- Deleting a Loop
- Erasing All Loops (Internal Memory)
- Erasing All Loops (External Memory Card)
- Using JamSync
- Setup
- External Micro SD/SDHC Memory Cards
- JamManager XT Librarian Software
- Optional FS3X Footswitch
- Factory Restore
- Specifications
7
151413
13. POWER JACK
Connect the included power supply
to this jack. The JamMan Solo XT can
only be powered using the external
power supply.
14. JAMSYNC OUT JACK
Connect this jack to the JamSync
IN jack of another JamMan Solo XT,
using a TRS (stereo) 1/8” mini cable,
for master loop control.
15. JAMSYNC IN JACK
Connect this jack to the JamSync
OUT jack of another JamMan Solo
XT, using a TRS (stereo) 1/8” mini
cable, for slave loop operation.
18 191716
22 232120
16. FOOTSWITCH JACK
This jack accommodates the FS3X
footswitch for remotely selecting
loop memories, tapping in loop
tempo, and performing stop and clear
functions.
17. RIGHT INPUT JACK
Connect a second input to this jack
for stereo operation. The left and
right inputs are processed separately
through the looper engine and then
fed to the left and right outputs to