User Manual
Table Of Contents
- Introduction
- Features
- Included Items
- User Interface & Connectors
- Connection Diagrams
- Quick Start
- Operation
- Selecting a Loop in Memory
- Free-Form vs Auto Quantized Looping
- Recording a Loop (Free-Form)
- Recording a Loop Using Auto Record
- Recording a Loop (Auto Quantize)
- Recording a Loop Using Pedal Tempo (Auto Quantize)
- Recording a Loop Using the AUX IN Jack
- Multiple Loop Playback (Cueing Loops)
- Recording Overdubs
- Undo, Redo, & Clear
- Time Stretching a Phrase
- Storing a Loop
- Copying a Loop
- Deleting a Loop
- Erasing All Loops (Internal Memory)
- Erasing All Loops (External Memory Card)
- Using JamSync
- Setup
- External Micro SD/SDHC Memory Cards
- JamManager XT Librarian Software
- Optional FS3X Footswitch
- Factory Restore
- Specifications
17
Recording a Loop (Auto Quantize)
Pedal Tempo Off (Default)/Auto Record Off (Default)
1. Select an empty memory location
using the <UP/DOWN> buttons
(LOOP and SINGLE LEDs will be off).
2. Set the <RHYTHM LEVEL> control
to the 9 o’clock position then tap
the <TEMPO> button a few times at
the rate you want the phrase tempo
to be. You will begin to hear the
Rhythm Guide Track. The beats will
be indicated by a flashing TEMPO
button LED, flashing red on the first
downbeat and green on all remaining
beats of the measure. When using the
Rhythm Guide Track, time signature
can be manually set to a different time
signature other than the default of 4
beats per measure (see “Setup > Time
Signature
”).
3. Press the <PEDAL SWITCH> to
initiate recording and begin playing.
You will receive a one measure count
in, indicated by a flashing red and
green STATUS LED. After the count
in, begin playing with the first beat
to start recording. Recording will be
indicated by a solid red STATUS LED.
4. As soon as you’re done recording,
press the <PEDAL SWITCH> again
to stop recording and initiate playback.
Quickly press the <PEDAL SWITCH>
twice to stop loop playback.
5. Press the <STORE> button twice if
you wish to store the loop.