User Manual
Table Of Contents
- Introduction
- Features
- Included Items
- User Interface & Connectors
- Connection Diagrams
- Quick Start
- Operation
- Selecting a Loop in Memory
- Free-Form vs Auto Quantized Looping
- Recording a Loop (Free-Form)
- Recording a Loop Using Auto Record
- Recording a Loop (Auto Quantize)
- Recording a Loop Using Pedal Tempo (Auto Quantize)
- Recording a Loop Using the AUX IN Jack
- Multiple Loop Playback (Cueing Loops)
- Recording Overdubs
- Undo, Redo, & Clear
- Time Stretching a Phrase
- Storing a Loop
- Copying a Loop
- Deleting a Loop
- Erasing All Loops (Internal Memory)
- Erasing All Loops (External Memory Card)
- Using JamSync
- Setup
- External Micro SD/SDHC Memory Cards
- JamManager XT Librarian Software
- Optional FS3X Footswitch
- Factory Restore
- Specifications
51
Record Sequence
The Record Sequence feature determines the order in which recording, overdubbing,
and playback occurs. The available Record Sequence options are:
OPTION RECORD SEQUENCE DESCRIPTION
rdP
Record » Dub » Play Enables overdubbing immediately after record.
rPd
Record » Play » Dub Enables Play immediately after record.
To change the Record Sequence setting:
1. Press the <SETUP> button nine times
or until rdP or rPd appears in the
display.
2. Press the <UP/DOWN> buttons to
select the desired Record Sequence
option.
3. Press the <PEDAL SWITCH> to exit
the Setup menu.
NOTE: The Record Sequence parameter is a global parameter, so storing is not necessary.