A Harman International Company
Warning For your protection, please read the following: Water and Moisture: Appliances should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.) Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. These symbols are internationally accepted symbols that warn of potential hazards with electrical products.
DECLARATION OF CONFORMITY Manufacturer’s Name: Manufacturer’s Address: declares that the product: Product Name: Product Options: Digitech Electronics 8760 S. Sandy Parkway Sandy, Utah 84070, USA Whammy/Whammy4 All (requires a Class II power adapter that conforms to the requirements of EN60065, EN60742, or equivalent.
Warranty We at Digitech are very proud of our products and back-up each one we sell with the following warranty: 1.The warranty registration card must be mailed within ten days after purchase date to validate this warranty. 2. Digitech warrants this product, when used solely within the U.S., to be free from defects in materials and workmanship under normal use and service. 3.
Included Items The utmost care was taken while your Whammy™ was being manufactured. Everything should be included and in perfect working order. Before you get started, please make sure that the following items have been included: • • • • Whammy™ Pedal PS750 or PS0913B Power Supply User’s Guide Warranty Card If anything is missing, contact the factory at once. Please take a moment to complete your warranty card. It is your safeguard should a problem arise with your Whammy™.
Guided Tour Page2 Detailed Descriptions 1 2 5 3 4 7 8 6 9 1. Preset Knob - This knob is used to select the Whammy™ (bend), Harmony intervals, or Detune range controlled by the treadle. 2. Effect LED - This LED lights to indicate the effect is on.
4. Effect Switch - This switch turns the effect on and off. 5. Input - Connect your instrument to this jack. 6. MIDI In - Connect any external MIDI device to this jack for the purpose of controlling the Whammy™ remotely. 7. Power - Connect the provided power supply to this jack. Do not use any power supply other than the supplied PS750 or PS0913B. 8. Dry Out - This jack contains your dry guitar signal only. No effect is present at this output. 9.
Page4 Making Connections The Whammy™ pedal is extremely easy to set up and use. Simply follow these steps and you be Whammin. 1. Connect your instrument to the Whammy™ input. 2. Connect from the “Wet Added” output to your favorite distortion pedal or to your amplifier. 3. Connect from the Whammy™ Dry Out to a guitar tuner if desired. 4. Connect from the MIDI Out of a MIDI controller to the MIDI In on the Whammy™ if desired. 5. Connect the power supply between an AC outlet and the power jack on the Whammy™.
The Whammy™ pedal contains 17 Presets which are selected by rotating the Preset knob. An LED will light to indicate which preset has been selected. Each Preset will fall into one of three groups: Whammy, Harmony, or Detune. Whammy - This group of Presets will bend your incoming signal either up or down depending upon the Preset you have chosen. As the treadle is rocked back and forth, the signal will bend from the original input pitch, to the pitch specified by the selected Preset.
Page6 Harmony - This group of Presets adds a harmony to your incoming signal. Both the harmony note and the input signal are mixed together as if two guitars were playing simultaneously. As you rock the pedal back and forth, the harmony note bends between two intervals specified by the selected Preset but the input signal remains unchanged. Harmony Presets include: Harmony Presets Oct Up/Oct Dn - Bends the harmony between one octave below (toe up) and one octave above (toe down) the input note.
Detune Presets Shallow - The copied signal is shifted slightly out of tune from the original pitch. Deep - The copied signal is shifted substantially out of tune from the input signal. User’s Guide Page7 Detune - This group of Presets creates a copy of your input signal, slightly shifts the pitch of the copied signal and mixes it back with the original signal. As the treadle is rocked back and forth, the level of this detuned signal is changed.
Page8 MIDI Functions A new feature found in this incarnation of the Whammy™ is a MIDI input. MIDI messages can select a Whammy™ Preset with the effect engaged or disengaged, and control the pedal position. MIDI Channel The Whammy™ MIDI channel is used for receiving incoming MIDI data only. The Whammy™ can receive MIDI messages on any, or all MIDI channels. The following steps outline the procedure for accessing or changing the MIDI channel: 1. Disconnect the the power from the Whammy™ pedal. 2.
User’s Guide Page9 MIDI Program Changes The Whammy™ uses MIDI Program Change commands for preset selection. Presets can be selected in either an active or bypassed state. The following list outlines the program change commands recognized by the Whammy™, and the corresponding Whammy™ preset.
Page10 MIDI Continuous Control The Whammy™ is capable of remotely adjusting the treadle position, as well as turning the Whammy™ effect on and off through the use of MIDI continuous control commands. MIDI CC11 adjusts the treadle position. A value of 0 on MIDI CC11 corresponds to a toe up position and 127 corresponds to a toe down position. MIDI CC0 is used to turn on and off the Whammy effect.
THD: A/D Conversion: D/A Conversion: Max Input: Max Output: Pitch Bend: Detune: Dimensions: Weight: 46.875 kHz 20 Hz to 20kHz 20 Hz to 12kHz Greater than -95dB (A weighted); ref = max level, 22 kHz bandwidth 0.006% (1kHz); ref = 1dBu w/ unity gain 24 bit 24 bit +8.8 dBu +8.8 dBu +2/-3 Octaves -4 to -30 cents 8” (L) x 6.3” (W) x 2.5” (H) 3.5 lbs. (1.
DigiTech and Whammy are trade marks of the DigiTech Harman Music Group Inc. 8760 S. Sandy Parkway Sandy, Utah 84070 Copyright Harman Music Group PH (801) 566-8800 Printed in the USA 02/00 FAX (801) 566-7005 Manufactured in the USA International Distribution 8760 S. Sandy Parkway Whammy Owners Manual 18-6363-B Sandy, Utah 84070 USA Please visit us on the World Wide Web at: http://www.digitech.