User Manual

29
All phrases in the JamMan
®
Solo are
recorded as loops by default but they can
be changed to a Single phrase if desired. A
Single phrase plays the recorded phrase
once and then stops. Slow repeated
presses of the PEDAL SWITCH will
restart Single phrase playback from
the beginning. Pressing the PEDAL
SWITCH quickly two times will start
and then stop Single phrase playback. You
can always change Single phrases back to
Loops later. To change between Single and
Loop, follow these steps:
Stop Loop playback if it is playing.1.
Select a stored Loop phrase (2. LOOP
LED is lit) using the LOOP SELECT
buttons. If the CARD MEM LED is lit,
you have selected a memory location
on the optional memory card.
Press and hold the 3. TEMPO and
STORE buttons simultaneously to
enter the Setup menu. The LOOP
LED will now be flashing and Lo
(Loop) will show in the DISPLAY.
Use the 4. LOOP SELECT buttons
to change between SINGLE and
LOOP options for phrase playback.
The STORE button will light to
indicate this change must be stored if
it is to be recalled later.
Press the 5. STORE button twice to
store the changes.
NOTE: Single phrases cannot have
overdubs added to them.
Loop / Single Phrases