User Manual

You can undo your last overdub anytime the current loop number selection

remains unchanged. If you change your mind after undoing something, you

can redo it.

: Changing loops or plugging into a computer via USB discards any

unstored changes. Storing the changes will remove the ability to undo or

clear overdubs.

Undo an Overdub

Press and hold the REC/PLaY/OVERDUb footswitch for two seconds to undo

your last overdub. The OVERDUb LED ﬂashes when the undo takes place.

Redo an Overdub

Press and hold the REC/PLaY/OVERDUb footswitch to redo the last undo; the

OVERDUb LED ﬂashes to indicate the action has been performed.

Clear Overdubs/Unsaved Phrases

Press and hold the STOP/TEMPO footswitch for two seconds to clear the

unstored recording/overdubs. The RECORD LED will ﬂash to conﬁrm the

clearing. If the loop had been previously stored, the clear action will only

clear unsaved phrases and overdubs but leave the original loop that had

been stored untouched.

Changing to a different loop also clears any unsaved phrases and overdubs.

Undo, Redo, and Clear