Wireless TWS Earphones with Bluetooth® 5.
Box Contents: 2 x TWS Earphones 1 x USB Charging Case 1 x USB Micro B Charging Cable Product Diagram: # Feature 1. Play/Pause / Call/Volume Button 2.
. LED Status Indicator 4. Speaker 5. Speaker Feature 1. USB Power Socket (Rear) 2. Charging Ports 3.
Operation: Bluetooth Paring: 1. Make sure the earphones are fully charged before use, pull both earphones out of the charging case. Note: Press and hold the power button for up to 5 seconds to turn the earphones off. 2. The LED indicator should be flashing red and blue. Open the settings of your smart phone and ensure Bluetooth® is turned on. 3. Once your Bluetooth® is enabled; Scan for devices and the Bluetooth® name AA-2165 should appear. Bluetooth® Name: AA-2165 4.
. You will hear a voice prompt from the earphones saying “Connected”. The volume can be controlled by your smartphone or earphones. The battery status can also be shown in your Bluetooth settings. Note: The earphones will automatically turn off after 3 minutes or if they’re too far away from your device.
Music Playback: Function Pause Play Next Track Volume Button Press the play/call button t to pause the current music track Press the play/pause button again after pausing to resume the current music track Press the play / call button 2 times to skip to the next music track Press the play / call button 3 times to turn the volume up or down Charging: Earphones: Insert the earphones into the earphone charging case to recharge them. The red LED should now be lit on the earphones to indicate charging.
Charging Case: 1. Insert the USB micro B charging cable in a 5VDC mains power adaptor (not included) or a suitable USB charging port such as a computer. 2. Insert the micro B USB plug into the USB power socket of the charging case. 3. The LED status indicator will flash blue once charging has started. 4. Once fully charged; the LED status indicator will turn to a solid blue.
Problem: Solution: No Power / LED Indicator Ensure the USB charging cable is connected properly to a USB charging port or USB charging adaptor. Check to see if your USB power source is working correctly. Ensure the volume is correctly turned up on your smartphone. Ensure the earphones are correctly paired and turned on. No Audio Turn the earphones off and on again, turn off the Bluetooth of your smartphone or tablet and turn back on. Type in the password “0000” if it asks you for one.
Safety: 1. Do not open the earphones or charging case of this product to prevent the unit from damage. 2. Keep the earphones and earphone charging case away from high temperatures as it may damage the device. 3. Do not expose the earphones or earphone charging case to water or liquids to prevent the unit from damage.
Specifications: Bluetooth® Version: 5.3+EDR Transmission Range: Up to 10m Frequency Response: 20Hz-20KHz Sensitivity: 95dB±3dB Mic Sensitivity: -42dB±3dB Impedance: 32Ω Driver Size: 10mm Playback Time: 2-4 Hours Talk Time: Up to 4 Hours Standby Time: Up to 100 Hours (Single) Up to 60 Hours (Both) Charging Time: Up to 1 Hour (Earphones) Up to 2 Hours (Charging Case) Battery: 3.7V Li-Ion, 30mA (Each Earphone) 3.
Distributed by: Electus Distribution Pty. Ltd. 46 Eastern Creek Drive, Eastern Creek NSW 2766 Australia Ph: 1300 738 555 Int’l: +61 2 8832 3200 Fax: 1300 738 500 www.electusdistribution.com.
