User Manual

20
Using The Tuner
The built-in tuner allows you to effortlessly
tune your guitar and offers 4 different tuning
references as shown in the table to the
right. In most cases you will use the standard
tuning reference, which is A440 (A=440Hz).
This is the default tuning reference setting in
the Element/Element XP.
Tuning Reference Options
Option
(Shown In Display) Reference
40
A=440Hz (Default, standard setting)
Ab
A=A♭ (A flat)
G
A=G
Gb
A=G♭ (G flat)
The tuner can be accessed from either Play
Mode or Edit Mode. As a note is played, the
LED display will show the note. The most
center effect LED (green) will light when
the note is in tune. If an effect LED to the
left of the green LED is lit, the note is flat,
so you must tune the string up. If an LED to
the right of the green LED is lit, the note is
sharp, so you must tune the string down.
In Tune
Note
♭(Flat)
Tune Up
♯(Sharp)
Tune Down
To use the tuner:
1. Press and hold both FOOTSWITCHES simultaneously. The display will read bYP briefly then
tu then ---. The tuner is now active.
2. If you wish to change the tuning reference, turn the SELECT knob. The default tuning
reference is A=440Hz (represented as
40 in the LED display), which is considered to be the
standard tuning reference and will be used in most cases.
3. Tune your guitar.
4. Press either FOOTSWITCH to exit the tuner.
NOTE: If preset modifications had been made prior to entering the tuner, the changes will still be
available and can be stored after exiting the tuner.