User`s guide

3 - 51DigiGate-700
™
for Windows
®
- User’s Guide
DigiGate-700
for Windows
™ ®
Figure 3-107
Figure 3-106
1. From the Utility Menu with the System
Controller tab active, Click on the Clear
SysCon button. Figure 3-106.
NOTE: The DigiGate-700 for Windows
System Controller (SysCon) is the heart of the
system and performs the access control.
Clearing the SysCon removes ALL
programming from the controller.
Warning: this action should not be performed
unless directed by a Service Technician.
2. This will open the Confirm window with a
prompt of “Clear System Controller?”
Figure 3-107.
3. Click on the Yes button to clear the SysCon or
on the No button to abandon the operation.
NOTE: To restore the System Controller after
doing a Clear SysCon , do Set Controller ,
then Download All . Pages 3-52 and 3-53.
System Controller Utilities
Utility
This section deals with System Controller utilities and Data Utilities . The following utilities are routines
that you may use to control and perform minor maintenance to your DigiGate-700 for Windows system.
Each button on the Utility Menu performs a specific task which will be explained in the following pages.
For all of the following, we will assume that you have Clicked on the Utility button on the Main Menu ,
Figure 3-46, Page 3-24, and that the Utility Menu window is active.
Clear SysCon