User`s guide

3 - 73DigiGate-700
™
for Windows
®
- User’s Guide
DigiGate-700
for Windows
™ ®
Figure 3-154
Figure 3-153
1. Click on the Arm/Disarm Unit tab to work
with individual or groups of units.
Figure 3-154.
2. In the Options area, Select One Unit and type
a unit number in the Unit field to arm or disarm
a single unit.
OR
Select the Vacant option under Options to
specify all vacant units or Rented and Vacant
to specify ALL units.
3. Select Arm or Disarm from the Alarm Status
list box.
4. When all selections have been made, Click on
the OK button to perform the action or on the
Cancel button to abandon the operation and
return to the Main Menu .
5. The Confirm window will open asking you to
verify your decision. The prompt will pertain to
the action you are performing.
6. Click on the OK button to perform the action or
on the Cancel button to abandon the operation
and return to the Main Menu .
NOTE: If an alarm is sounding, Selecting
Acknowledge and Clicking on OK will turn
the siren off and reset the alarm zone. Selecting
the Arm or Disarm selected Alarm Zone
will perform the stated function when OK is
Clicked.
4. Select (check) or Deselect (uncheck) the Alarm
Zones check boxes you want.
Figure 3-153.
5. The All and None buttons will Select or Clear
all the check boxes respectively.
6. When all selections have been made, Click on
the OK button to perform the action or on the
Cancel button to abandon the operation and
return to the Main Menu .
The two tabs, Alarm Zones and Arm/Disarm
Unit are independent windows. OK must be
clicked when the selected windows is active to
perform the desired action. Clicking OK on the
Alarm Zones windows has NO effect on the
Arm/Disarm Unit windows and vice versa.
Arm/Disarm Unit