User`s guide

4 - 8 How Do I ...?
DigiGate-700
for Windows
™ ®
1. From the Main Menu , Click on the Transfer button.
2. This will open the Transfer Unit window.
3. Enter a valid unit number in the Transfer Unit window and Click on the OK button to open the Select
units to transfer/copy to window
OR
4. Click on the Last Name field and enter the tenant’s last name and Click on the OK button.
5. Select one of the choices and again, Click on the OK button.
6. Select a unit from the Select units to transfer/copy to window.
7. Click on the Transfer button to move the tenant from one unit to another.
8. The Confirm window will open if Verify Prompts is set to Yes .
9. Click Yes to transfer the tenant and return to the Main Menu .
NOTE: See Page 3-14 in Chapter 3.
Transfer Tenants
1. From the Main Menu , Click on the Transfer button.
2. This will open the Transfer Unit window.
3. Enter a valid unit number in the Transfer Unit screen and Click on the OK button to open the Select
units to transfer/copy to window
OR
4. Click on the Last Name field and enter the tenant’s last name and Click on the OK button.
5. Select one of the choices and Click on the OK button.
6. Select a unit from the Select units to transfer/copy to window.
7. Click on the Link button to copy the information to the selected unit.
8. The Confirm window will open if Verify Prompts is set to Yes .
9. Click Yes to link the units and return to the Main Menu .
NOTE: See Page 3-15 in Chapter 3.
Link Tenant Units