User`s guide

2 - 28 Setting Up a New Site
DigiGate-700
for Windows
™ ®
1. Click on the SysCon Setup tab of the Setup
Menu , then Click on the Holidays button.
Figure 2-52, Page 2-27.
2. This will open the Define Holidays window.
Figure 2-54.
NOTE: The DigiGate-700 for Windows
system ships with NO pre-defined Holidays.
3. To add a new holiday, Click on the Add Button.
Figure 2-54.
4. This will open the Holidays window.
Figure 2-55.
5. The Number field is assigned by the system
automatically with the next sequential number.
You cannot edit this value.
6. Select the Description field and type in your
description.
7. Select and open the Month list box and Select
the correct month. Figure 2-55.
8. In the calendar displayed for Day , Click on the
day of the Holiday you are defining.
9. Click on OK to accept and add a new holiday or
Cancel to discard the information entered.
10. To edit a holiday, Select it from the list, Figure
2-54, Click on the Edit button and change the
information you chose using steps 6 through 9
above. Figure 2-55.
11. To delete a holiday, Select it from the list, Click
on the Delete Button. Figure 2-54.
12. You will be asked to confirm by the Confirm
window. Figure 2-19, Page 2-10.
13. Click Yes button to delete the holiday or the
No button to abandon and leave the holiday
defined.
Figure 2-54
Figure 2-55
Defining Holidays