Owner's Manual

3
NOTE: When the Momentary switch is set to the “ON” position, the FreqOut will use a buered
bypass signal path. When the Momentary switch is set to the “OFF” position, the FreqOut provides a
true bypass signal path.
6.
Gain & Onset Knobs
Gain Knob – Adjusts the amount of feedback gain. Use lower settings for a subtle eect. Use higher
settings to increase the feedback/sustain eect.
Onset Knob – Determines how long it takes before the feedback grows to full strength. Lower knob
settings decrease the time, while higher knob settings increase the time.
7.
Type Knob
Selects one of seven feedback types:
SUB – Produces feedback an octave below the note.
1ST – Produces rst-harmonic (unison) feedback of the note.
2ND – Produces second-harmonic feedback of the note.
3RD – Produces third-harmonic feedback of the note.
5TH – Produces fth-harmonic feedback of the note.
NAT LOW – Produces various feedback frequencies in lower harmonic range.
NAT HIGH – Produces various feedback frequencies in higher harmonic range.
See
“Using The Harmonic Types” on page 4 for more detailed information on using the
dierent harmonic types.
8.
Dry Switch
Turns the dry signal on or o while the eect is enabled.
NOTE: When the Momentary switch is set to “ON” and Dry switch is set to “OFF”, there will be
no dry signal passed through the FreqOut.
9.
Input Jack
Connect your instrument to this jack.