Owner's Manual

Recording Overdubs

Once a phrase has been recorded, overdubs can be added on top of the phrase�

To record overdubs:

1� Press the

FOOTSWITCH to start loop playback� The PLAY LED will light solid green and

the phrase will begin playing�

2� Press the

FOOTSWITCH again to begin overdub recording� The DUB LED will light solid

yellow and audio will be recorded on top of the phrase�

3� When done overdub recording, press the

FOOTSWITCH to end the overdub recording

session� The loop will continue playing along with the newly recorded overdub�

4� You can now decide whether you would like to undo the last overdub and re-record

it (see "Undoing/Redoing Overdubs" in the following section) or proceed and record

additional overdubs by repeating steps 2-3�

5� Press the

FOOTSWITCH 2 times quickly to stop loop playback�

Undoing/Redoing Overdubs

When recording overdubs, you can choose to undo the last overdub recorded if you wish

to re-record it� If you change your mind or accidentally undo an overdub, you can then redo

the overdub to retrieve it�

To undo/redo an overdub:

1� Record an overdub as described in the previous section, "Recording Overdubs"�

2� Ensure the loop is playing (the

PLAY LED should be on)� If the loop is not playing, press

the

FOOTSWITCH 1 time to initiate loop playback� Once the loop is playing, press

and hold the

FOOTSWITCH for ~2 seconds� The DUB LED will quickly ash yellow,

indicating the overdub has been undone�

3� If you wish to restore the overdub, press and hold the

FOOTSWITCH again for ~2

seconds to redo the overdub� The

DUB LED will quickly ash yellow, indicating the

overdub has been redone�

NOTE: Each time an overdub is added, the last overdub is merged with the original loop

and can no longer be undone using the Undo feature� If the combined loop and overdub

length exceed 10 minutes (e�g�, a 6 minute loop and 6 minute overdub, etc�), the two

will automatically be merged and the overdub cannot be undone� Overdubs added to a

recorded loop of 5 minutes or less will not be automatically merged�